ovn-controller-vtep — Open Virtual Network local controller for vtep enabled physical switches.
Synopsis
ovn-controller-vtep [options] [--vtep-db=vtep-database] [--ovnsb-db=ovnsb-database]
Description
ovn-controller-vtep is the local controller daemon in OVN, the Open Virtual Network, for VTEP enabled physical switches. It connects up to the OVN Southbound database (see ovn-sb(5)) over the OVSDB protocol, and down to the VTEP database (see vtep(5)) over the OVSDB protocol.
PKI Options
PKI configuration is required in order to use SSL for the connections to the VTEP and Southbound databases.
- -p privkey.pem
- --private-key=privkey.pem
Specifies a PEM file containing the private key used as identity for outgoing SSL connections.
- -c cert.pem
- --certificate=cert.pem
Specifies a PEM file containing a certificate that certifies the private key specified on -p or --private-key to be trustworthy. The certificate must be signed by the certificate authority (CA) that the peer in SSL connections will use to verify it.
- -C cacert.pem
- --ca-cert=cacert.pem
Specifies a PEM file containing the CA certificate for verifying certificates presented to this program by SSL peers. (This may be the same certificate that SSL peers use to verify the certificate specified on -c or --certificate, or it may be a different one, depending on the PKI design in use.)
- -C none
- --ca-cert=none
Disables verification of certificates presented by SSL peers. This introduces a security risk, because it means that certificates cannot be verified to be those of known trusted hosts.
- --bootstrap-ca-cert=cacert.pem
-
When cacert.pem exists, this option has the same effect as -C or --ca-cert. If it does not exist, then the executable will attempt to obtain the CA certificate from the SSL peer on its first SSL connection and save it to the named PEM file. If it is successful, it will immediately drop the connection and reconnect, and from then on all SSL connections must be authenticated by a certificate signed by the CA certificate thus obtained.
This option exposes the SSL connection to a man-in-the-middle attack obtaining the initial CA certificate, but it may be useful for bootstrapping.
This option is only useful if the SSL peer sends its CA certificate as part of the SSL certificate chain. The SSL protocol does not require the server to send the CA certificate.
- --peer-ca-cert=peer-cacert.pem
-
Specifies a PEM file that contains one or more additional certificates to send to SSL peers. peer-cacert.pem should be the CA certificate used to sign the program’s own certificate, that is, the certificate specified on -c or --certificate. If the program’s certificate is self-signed, then --certificate and --peer-ca-cert should specify the same file.
This option is not useful in normal operation, because the SSL peer must already have the CA certificate for the peer to have any confidence in the program’s identity. However, this offers a way for a new installation to bootstrap the CA certificate on its first SSL connection.
Configuration
ovn-controller-vtep retrieves its configuration information from both the ovnsb and the vtep database. If the database locations are not given from command line, the default is the db.sock in local OVSDB’s ’run’ directory. The datapath location must take one of the following forms:
-
ssl:host:port
The specified SSL port on the give host, which can either be a DNS name (if built with unbound library) or an IP address (IPv4 or IPv6). If host is an IPv6 address, then wrap host with square brackets, e.g.: ssl:[::1]:6640. The --private-key, --certificate and either of --ca-cert or --bootstrap-ca-cert options are mandatory when this form is used.
-
tcp:host:port
Connect to the given TCP port on host, where host can be a DNS name (if built with unbound library) or IP address (IPv4 or IPv6). If host is an IPv6 address, then wrap host with square brackets, e.g.: tcp:[::1]:6640.
-
unix:file
On POSIX, connect to the Unix domain server socket named file.
On Windows, connect to a localhost TCP port whose value is written in file.